Product Name : Ruhens V Series Self-Replaceable Water Filters( WHP-3200, hydroflux h2300)
This item ship from Korea
100% Original item
Delivery time : around 8 days
@ Product Descriptions
*Filter type: one direction
* Filter type: 2nd stage water purification, composite carbon, nanofact, hollow fiber membrane
* Number of filter stages: 2nd stage
* Water purification function: Purified water only
This filter is a genuine filter used for Ruhens products WHP-2300, 2310, 2360, 3000, 3010, and 3020.
Ruhens WHP-3200 genuine filter The lengths are different, but the brackets are the same (they are made by the same Ruhens, so the brackets are the same, so they are interchangeable). This filter is compatible
Please look at the filter name, not the label color, and replace it according to the 1st or 2nd filter.
* If you replace existing filters at a rate of 2 every 6 months, for a total of 4 filters per year, the cost will be approximately 80,000 won per year.
* When used as a compatible filter, replace the primary filter 3 times every 4 months and the secondary filter once a year for a low cost of around 30,000 won per year!!
MICRO CARBON (micro carbon block filter)
Removes contaminants larger than 5 microns and removes residual salt water.
•Maximum operating temperature: 45 degrees
•Maximum purified water capacity: 3.8L/min
•Exchange cycle: 4 months
•Material: activated carbon + polyethylene
•Maximum operating pressure: 4.0kgf
NANOFACT FILTER
The nanofact filter made from NSF-certified materials removes norovirus, which causes food poisoning, as well as germs and bacteria.
•Exchange cycle: 12 months
•Material: Cellulose + activated carbon
•Maximum operating temperature: 45 degrees
•Maximum water purification capacity: 1.6L/min.
•Maximum operating pressure: 4.0kgf.
Compatible filters currently being sold are Ruhens products WHP-2300, 2310, 2360, 3000, 3010, 3020
Since this is a genuine filter, the WHP-3200 filter and bracket are the same, so they can be used interchangeably! However, please be aware that it is shorter than 3200 before ordering.
How to replace the filter
STEP 01 Lock the raw water ball valve
Open the side filter cover by pulling it toward the front. Turn the raw water ball valve clockwise to close the water.
STEP 02 Emptying the pressure and water inside the filter
Turn the water intake dial clockwise to empty the pressure inside the filter and the water remaining in the water purifier. After emptying the water, turn the water intake dial counterclockwise and return it to its original position.
STEP 03 Changing the filter
- Lift each filter and turn it counterclockwise to separate it from the filter head.
※ Thereplacement cycle for each filter is the same. (6 months)
- Remove the protective cap of the new filter and install it on the filter head by turning it clockwise.
※ Be sure to assemble the filter in accordance with the water purification treatment sequence.
STEP 04 Open the raw water ball valve
- Turn the raw water ball valve counterclockwise to open. (CLOSE OPEN)
※ The raw water ball valve must be turned for the water purifier to operate normally.
- Close the side filter cover.
